|
|
| 首页 >> 产品目录 >> 3D 三维 >> 三维实体扫描仪 |
 |
 |
    |
 |
| Model |
LPX-60 |
| Table size |
Diameter 203.2 mm (8 in.) |
Maximum scanning
area |
Plane scanning: Width 203.2 mm (8 in.), height 304.8 mm (12 in.)
Rotary scanning: Diameter 203.2 mm (8 in.), height 304.8 mm (12 in.) |
| Scanning pitch |
Plane scanning: width direction 0.2 to 203.2 mm, height direction 0.2 to 304.8 mm
Rotary scanning: circumference 0.2 to 3.6 degrees, height direction 0.2 to 304.8 mm |
| Repeat accuracy |
±0.1 mm (This figure reflects standard scanning conditions established by Roland DG.) |
Maximum table load
weight |
5 kg (11 lb.) |
| Laser |
Wavelength: 645 to 660 nm
Maximum output: less than 390 µW
(maximum output of the laser light emitted inside housing is 5 mW) |
| Sensor |
Noncontact laser sensor |
| Scanning method |
Spot-beam triangulation |
| Operating speed |
Table rotation speed: 10.06 rpm, head rotation speed: 4.98 rpm,
maximum head movement speed: 50 mm/sec. |
| Interface |
USB (compliant with Universal Serial Bus Specification Revision 1.1) |
| Power supply |
Dedicated AC adapter
Input: AC 100 to 240 V 10 % 50/60 Hz 1.7 A
Output: DC 19 V, 2.1 A |
| Power consumption |
Approx. 20 W (including AC adapter) |
| Dimensions |
500 [W] x 382 [D] x 619 [H] mm (19-11/16 [W] x 15-1/16 [D] x 24-3/8 [H] in.) |
| Weight |
32 kg (71 lb.) |
| Environment |
Temperature: 10 to 40°C (50 to 104°F) (25°C [77°F] or more recommended)
Humidity: 35 to 80 % (no condensation) |
| Included items |
AC adapter, power cord, AC adapter holder, cable clamps, USB cable, CD-ROM, clay, user's manual, and Roland LPX EZ Studio scanning software |
* Use the included USB cable. Never use a USB hub or the like.
System Requirements for Included Software
| Operating system |
Windows®98 SE (Second Edition)/Me/2000/XP |
CPU
|
Pentium® 4 processor or better recommended |
| Memory |
512 MB or more recommended |
| Display |
800 x 600 resolution and 16 bit colors (High color) or more recommended
OpenGL-compatible accelerator board recommended |
Free hard-disk space
required for installation |
Roland LPX EZ Studio: 100 MB or more
Dr.PICZA 3: 20 MB or more
3D Editor: 10 MB or more |
System Requirements for Optionally Available Software Pixform™Pro
Operating system
|
Windows® XP/2000/Me/NT 4.0 (SP6 or later) |
| CPU |
Pentium® or AMD Athlon™ |
Memory
|
Minimum 512 MB is required (1 GB or more is recommended) |
| Graphics Card |
1280 x 1024 resolution, 32-bit color or above, OpenGL 1.2 or higher |
Free hard-disk space
required for installation |
300 MB or more |
About scanned objects:
The LPX-60 scans objects using a laser light beam. Scan quality may vary depending on the materials or colors of the objects. The LPX-60 cannot scan around the top of an object where the laser beam either hits at too shallow an angle or cannot hit the object at all.
Objects that are transparent, translucent, or have surfaces which are fuzzy, glossy, or highly reflective, made of fabric, or of dark colors such as black, blue or green, may not produce good results. In these instances, using a matte-finish white overcoat or other temporary surfacing agent is required. |
| Page Top |
|
